Setting up IP-based Authentication Journey in AdminX

This guide explains how to create an IP-based authentication journey in AdminX, allowing you to manage a range of IP addresses for specific user journeys, allowlists, or blocklists.

---

Prerequisites

Before proceeding, ensure the following:

• You are logged in as a community admin in AdminX.

• The page with Adaptive Authentication Journeys is accessible.

• You have a valid CSV file containing IP addresses in different formats (single IP, CIDR, IP range).

Step 1: Add a new adaptive auth journey

1. Navigate to the Adaptive Authentication section in AdminX.

2. Click Add new adaptive auth journey to create a new journey.

3. Provide a name for the journey — for example, External Vendor IP allowlist.

4. Under Conditions, select IP Address and choose the operator is in the range of.

Step 2: Upload IP addresses from CSV

1. In the IP Address condition section, click the Choose IP input field or click the + icon.

2. A modal titled Add IP Address appears.

3. Select Upload from CSV.

Step 3: Verify the file upload

1. Choose the .csv file from your device and click Open.

2. Once selected, the file name is displayed in a separate field.

3. A File is uploaded message confirms a successful upload.

4. Review the list of IP addresses to ensure accuracy and validity.

Step 4: Save and confirm

1. Click Save.

2. If all IP values are valid, the modal closes and the added values appear in the IP address input field.

Step 5: Provide a valid decision and save

1. Enter a valid decision and click Save.

2. You are redirected to the Adaptive Authentication Journeys page.

3. The new authentication journey, with IP as one of the conditions, is visible.